明日ではなく、今日が大事と良く知られるから、そんなにぐずぐずしないで早く我々社のConstructing H3C High-Performance Campus Networks日本語対策問題集を勉強し、自身を充実させます。我々社の練習問題は長年でConstructing H3C High-Performance Campus Networks模擬試験トレーニング資料に研究している専業化チームによって編集されます。Constructing H3C High-Performance Campus Networks資格問題集はPDF版、ソフト版、オンライン版を含まれ、この三つバージョンから自分の愛用することを選んでいます。他の人に先立ってGB0-371-ENU認定資格を得るために、今から勉強しましょう。
有効的なGB0-371-ENU認定資格試験問題集を見つけられるのは資格試験にとって重要なのです。我々JapancertのConstructing H3C High-Performance Campus Networks試験問題と試験解答の正確さは、あなたの試験準備をより簡単にし、あなたが試験に高いポイントを得ることを保証します。Constructing H3C High-Performance Campus Networks資格試験に参加する意向があれば、当社のJapancertから自分に相応しい受験対策解説集を選らんで、認定試験の学習教材として勉強します。
購入前に、Japancertは皆様に無料のConstructing H3C High-Performance Campus Networks試験問題デモを提供します。あなたは試験に参加する予定があると、サイトでの無料デモをダウンロードして参考します。もちろん、購入前に、Constructing H3C High-Performance Campus Networks試験トレーニング資料についてのこと、ご遠慮なく我々社の係員にお問い合わせください。また、Japancertのどんな試験練習問題を購入して勉強中に、質問があると、ライブサポートなりメールなりすぐ連絡します。我々社は24時間に対応しています。
簡単な注文操作: ちょうど2つのステップがご注文を完了します。 あなたの支払いをした後に、我々は直ちに製品をあなたのメールボックスに送ります。添付ファイルをダウンロードしてください、そして、あなたは製品を取得します。
GB0-371-ENU試験問題集をすぐにダウンロード:成功に支払ってから、我々のシステムは自動的にメールであなたの購入した商品をあなたのメールアドレスにお送りいたします。(12時間以内で届かないなら、我々を連絡してください。Note:ゴミ箱の検査を忘れないでください。)
H3C GB0-371-ENU 試験シラバストピック:
| セクション | 目標 |
|---|---|
| トピック 1: キャンパスネットワークの基礎 | - キャンパスネットワークのアーキテクチャと設計 - エンタープライズネットワークモデルと展開 |
| トピック 2: キャンパスネットワークにおけるセキュリティの基礎 | - AAAの概念 (RADIUS/TACACS+) - ポートセキュリティとアクセス制御 |
| トピック 3: 高可用性メカニズム | - RRPP, VRRP, IRF - リンクアグリゲーション |
| トピック 4: スパニングツリープロトコル | - STP/RSTP/MSTPの概念と動作 |
| トピック 5: IPマルチキャスト | - マルチキャストの基礎とIGMP/Snooping - PIM-DM, PIM-SM |
| トピック 6: VLANおよびスイッチング技術 | - スイッチポートタイプとVLAN設定 - VLANの概念とIEEE 802.1Q - VLAN間ルーティングの原理 |
H3C Constructing H3C High-Performance Campus Networks 認定 GB0-371-ENU 試験問題:
1. The following statements about the role of BSR and RP in PIMSM are correct:
A) BSR controls the collection and dissemination of RP information and is the management core of the PIM-SM domain
B) RP is the rendezvous point where multicast receivers join a multicast group
C) If there is no BSR in the PIM-SM domain, RP information cannot be diffused, multicast receivers cannot join normally, and multicast traffic cannot be forwarded normally
D) RP is a relay station for multicast sources to forward multicast traffic
2. After executing the display interface Ethernet 1/0/1 command on the switch SWA, the output information is as follows:
[SWA]display interface Ethernet 1/0/1
Ethernetl/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
Port priority: 0
It can be judged from the above output
A) Data frames with VLAN10 tags will be discarded when they enter the port Ethernet1/0/1
B) Data frames with VLAN20 tags cannot be forwarded from port Ethemet1/0/1
C) Data with VLAN1 tags will be discarded when entering port Ethemet1/0/1
D) Data frames with VLAN10 tags will be stripped of tags when they leave port Ethemet1/0/1
3. As shown in the network, the switches all run RSTP. Initially, SWA, SWB and SWC are interconnected. When the topology is stable, connect SWB and SWD, then the following statements are correct.
A) After SWA receives the BPDU with TC set, it will clear the MAC address table and send RSTBPDU with TC set from E0/2
B) SWB will clear the MAC addresses learned by ports E0/1 and E0/2 and send RST BPDUs with TC set from these two ports
C) SWB will send RST BPDU with TC set within twice the HelloTime
D) After SWC receives the BPDU with TC set, it will clear the MAC address learned by port E0/1 and send RST BPDU with TC set from this port
4. The following are functions of the convergence layer (choose one or more)
A) Complex routing strategy
B) High-speed packet switching
C) Possess a large number of interfaces for connecting with end user computers
D) Access security control
5. In the networking shown in the figure, the interconnection lines between RT1, RT2, RT3, and RT4 are all 1000M links except the shared Ethernet part which is a 10M link. The OSPF protocol is run to enable routing to communicate with these 4 routers. Both run PIMSM protocol, RP is 1.1.1.1, receivers are connected to the downstream interfaces of RT1 and RT2, and IGMP is enabled on the corresponding interfaces. Then, when the receiver sends a group join request, which of the following routers are connected (*, G) entry exists?
A) RT3
B) RT2
C) RT4
D) RT1
質問と回答:
| 質問 # 1 正解: A、B、D | 質問 # 2 正解: B、D | 質問 # 3 正解: B、C、D | 質問 # 4 正解: A | 質問 # 5 正解: A、B、D |

PDF版 Demo
品質保証JapanCertは試験内容に応じて作り上げられて、正確に試験の内容を捉え、最新の99%のカバー率の問題集を提供することができます。
一年間の無料アップデートJapanCertは一年間で無料更新サービスを提供することができ、認定試験の合格に大変役に立つます。もし試験内容が変えば、早速お客様にお知らせします。そして、もし更新版がれば、お客様にお送りいたします。
全額返金お客様に試験資料を提供してあげ、勉強時間は短くても、合格できることを保証いたします。不合格になる場合は、全額返金することを保証いたします。(
ご購入の前の試用JapanCertは無料でサンプルを提供することができます。無料サンプルのご利用によってで、もっと自信を持って認定試験に合格することができます。



レビュー

